Work Procedure

1. Check that accelerator pedal is fully released.
2. Turn power switch ON and wait at least 2 seconds.
3. Turn power switch OFF and wait at least 90 seconds.
   NOTE: During this period, never perform vehicle handling such as opening and closing of doors. If some kind of vehicle handling is performed, then wait another 90 seconds or more from the time of the vehicle handling.
4. Repeat steps 2 and 3 for 4 times.
5. Turn power switch OFF and wait at least 90 seconds.
   NOTE: During this period, never perform vehicle handling such as opening and closing of doors. If some kind of vehicle handling is performed, then wait another 90 seconds or more from the time of the vehicle handling.

YES

END