Work Procedure: Test

CONSULT

Perform "READ CONFIGURATION" to save or print current vehicle specification.

Is vehicle specification saved normally?

YES

GO TO 2.

NO

GO TO 4.

Replace lane camera unit. Refer to Removal and Installation .

GO TO 3.

CONSULT

Perform "WRITE CONFIGURATION - Config file" to write vehicle specification.

GO TO 6.

Replace lane camera unit. Refer to Removal and Installation .

GO TO 5.

CONSULT

1. Select "WRITE CONFIGURATION - Manual selection"
2. Touch "Next".
3. Touch "OK".
4. Check that the configuration has been successfully written and touch "End".

GO TO 6.

Confirm that LDW/I-LI systems operate normally.

1. Perform the LDW/I-LI system action test. Refer to Work Procedure  for LANE DEPARTURE WARNING or Work Procedure  for INTELLIGENT LANE INTERVENTION
2. Check that the LDW and I-LI systems operate normally.

Work End.