Detailed Flow
- GET INFORMATION FOR SYMPTOM
Get detailed information from the customer about the symptom (the condition and the environment when the incident/malfunction occurred).
GO TO 2.
- CONFIRM THE SYMPTOM
Try to confirm the symptom described by the customer. Verify relation between the symptom and the condition when the symptom is detected.
GO TO 3.
- PERFORM SELF DIAGNOSTIC RESULT
CONSULT
- Ignition switch ON and wait for 2 seconds or more.
- Perform Self Diagnostic Result for MULTI AV.
Are any DTCs displayed?
YES
Refer to DTC Index .
NO
GO TO 4.
- PERFORM SYMPTOM DIAGNOSIS
Refer to Symptom Table .
GO TO 5.
- FINAL CHECK
Refer to symptom described by the customer in step 1.
Is the symptom still present?
YES
GO TO 2.
NO
Inspection End.