Active Test Mode
- Do not perform active test while driving vehicle.
- Make sure to completely bleed air from brake system.
- The active test cannot be performed with the ABS warning lamp, VDC OFF indicator lamp, SLIP indicator lamp or brake warning lamp on.
- ABS warning lamp, VDC OFF indicator lamp, SLIP indicator lamp and brake warning lamp turn on during active test.
- When active test is performed while depressing the pedal, the pedal depression amount will change. This is normal.
- "TEST IS STOPPED" is displayed 10 seconds after operation start.
- After "TEST IS STOPPED" is displayed, to perform test again, touch BACK.
Test Item
ABS SOLENOID VALVE
- Select "Up", "Keep" and "Down". Then use screen monitor to check that solenoid valve operates as shown in the table below.
Test item
Display item
Display (Note)
Up
Keep
Down
FR RH SOL
FR RH IN SOL
Off
On
On
FR RH OUT SOL
Off
Off
On*
USV[FR-RL]
Off
Off
Off
HSV[FR-RL]
Off
Off
Off
FR LH SOL
FR LH IN SOL
Off
On
On
FR LH OUT SOL
Off
Off
On*
USV[FL-RR]
Off
Off
Off
HSV[FL-RR]
Off
Off
Off
RR RH SOL
RR RH IN SOL
Off
On
On
RR RH OUT SOL
Off
Off
On*
USV[FL-RR]
Off
Off
Off
HSV[FL-RR]
Off
Off
Off
RR LH SOL
RR LH IN SOL
Off
On
On
RR LH OUT SOL
Off
Off
On*
USV[FR-RL]
Off
Off
Off
HSV[FR-RL]
Off
Off
Off
*: On for 1 to 2 seconds after the select, and then Off.
NOTE: A brief moment of On/Off condition occurs every 20 seconds after ignition switch turned ON. This is not malfunction because it is an operation for checking.
ABS SOLENOID VALVE (ACT)
- Select "Up", "ACT UP" and "ACT KEEP". Then use screen monitor to check that solenoid valve operates as shown in the table below.
Test item
Display item
Display (Note)
Up
ACT UP
ACT KEEP
FR RH ABS SOLENOID(ACT)
FR RH IN SOL
Off
Off
Off
FR RH OUT SOL
Off
Off
Off
USV[FR-RL]
Off
On
On
HSV[FR-RL]
Off
On*
Off
FR LH ABS SOLENOID(ACT)
FR LH IN SOL
Off
Off
Off
FR LH OUT SOL
Off
Off
Off
USV[FL-RR]
Off
On
On
HSV[FL-RR]
Off
On*
Off
RR RH ABS SOLENOID(ACT)
RR RH IN SOL
Off
Off
Off
RR RH OUT SOL
Off
Off
Off
USV[FL-RR]
Off
On
On
HSV[FL-RR]
Off
On*
Off
RR LH ABS SOLENOID(ACT)
RR LH IN SOL
Off
Off
Off
RR LH OUT SOL
Off
Off
Off
USV[FR-RL]
Off
On
On
HSV[FR-RL]
Off
On*
Off
*: On for 1 to 2 seconds after the select, and then Off.
NOTE: A brief moment of On/Off condition occurs every 20 seconds after ignition switch turned ON. This is not malfunction because it is an operation for checking.
ABS MOTOR
- Select "On" and "Off". Make sure motor relay and actuator relay operates as shown in table below.
Test item
Display item
Display
On
Off
ABS MOTOR
MOTOR RELAY
On
Off
ACTUATOR RLY (Note)
On
On
V/R OUTPUT
On
Off
M/R OUTPUT
On
Off
NOTE: A brief moment of On/Off condition occurs every 20 seconds after ignition switch turned ON. This is not malfunction because it is an operation for checking.