Work Procedure

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

SAVING VEHICLE SPECIFICATION (BCM)
CONSULT Configuration

Perform "Before Replace ECU" of "Read / Write Configuration" to save or print current vehicle specification. Refer to Description .

NOTE: If "Before Replace ECU" of "Read / Write Configuration" cannot be used, use the "Manual Configuration" after replacing BCM.

GO TO 2.
SAVING VEHICLE SPECIFICATION (TPMS)
CONSULT Configuration

Perform "Before Replace ECU" of "Read / Write Configuration" to save or print current vehicle specification. Refer to Work Procedure (Before Replacement) .

NOTE: If "Before Replace ECU" of "Read / Write Configuration" cannot be used, use the "Manual Configuration" after replacing BCM.

GO TO 3.
REPLACE BCM
Replace BCM. Refer to Removal and Installation .

GO TO 4.
WRITING VEHICLE SPECIFICATION (BCM)
CONSULT Configuration

Perform "After Replace ECU" of "Read / Write Configuration" or "Manual Configuration" to write vehicle specification. Refer to Description .

GO TO 5.
REGISTER INTELLIGENT KEYS
For initialization and registration of Intelligent Keys, refer to CONSULT Immobilizer mode and follow the on-screen instructions.

GO TO 6.
WRITING VEHICLE SPECIFICATION (TPMS)
CONSULT Configuration

Perform "After Replace ECU" of "Read / Write Configuration" or "Manual Configuration" to write vehicle specification. Refer to Work Procedure (After Replacement) .

GO TO 7.
INITIALIZE TPMS
Perform TPMS initialization. Refer to Work Procedure (After Replacement) .

WORK END