Protection Function

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.

The SLIP indicator lamp, ABS warning lamp and brake warning lamp turn ON and DTC "C118E" may be detected in "Self Diagnostic Result" mode of "ABS" when the brake pedal is excessively operated, such as air bleeding. This is not a system malfunction because this occurs due to the temporary decrease in accumulator fluid pressure. The system returns to normal condition when the accumulator fluid pressure reaches the specified pressure with the ignition switch ON and the SLIP indicator lamp, ABS warning lamp, and brake warning lamp turned OFF. After these steps, erase self-diagnosis results for "ABS" with CONSULT.

DTC

SLIP indicator lamp
ABS warning lamp
Brake warning lamp

Condition

Description protection function

C118E

When temporary decrease in accumulator fluid pressure is detected.

NOTE: System is not malfunctioning.

The following functions are suspended temporarily:

VDC function
TCS function
ABS function
Hill start assist function
Hill descent control function
EBD function
BLSD function

NOTE: DTC "C1111" is detected in "Self Diagnostic Result" mode of "ABS" when the accumulator system has a malfunction.