Configuration (ADAS Control Unit): Description

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

Since vehicle specifications are not included in the ADAS control unit after replacement, it is required to write vehicle specifications using CONSULT.

Configuration has three functions as follows:

Function		Description
Read/Write Configuration	Before ECU	Allows the reading of vehicle specification written in ADAS control unit to store the specification in CONSULT.
	After ECU replacement	Allows the writing of the vehicle information stored in CONSULT into the ADAS control unit.
Manual Configuration		Allows the writing of the vehicle specification into the ADAS control unit by hand.