Input/Output Signal Chart
WARNING: This page is about a different car, the 2019 Nissan NV3500 HD, 2019 Nissan NV2500 HD, and 2019 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.
|
Sensor |
Input signal to ECM |
ECM function |
Actuator |
|
Crankshaft position sensor (POS) Camshaft position sensor (PHASE) |
Engine speed* 1 |
Cooling fan speed request signal |
IPDM E/R Cooling fan motor |
|
Engine coolant temperature sensor |
Engine coolant temperature |
||
|
Refrigerant pressure sensor |
Refrigerant pressure |
||
|
Battery |
Battery voltage* 1 |
||
|
Combination meter |
Vehicle speed signal* 2 |
||
|
A/C auto amp. |
A/C ON signal* 2 |
||
|
A/C evaporator temperature* 2 |
|||
|
Target A/C evaporator temperature* 2 |
|||
|
Blower fan ON signal* 2 |
*1: The ECM determines the start signal status by the signals of engine speed and battery voltage.
*2: This signal is sent to ECM via the CAN communication line.