Application Item

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

CONSULT can display each diagnostic item using the diagnostic test modes as follows.

Diagnosis mode	Function description
Self Diagnostic Result	Self diagnostic result and freeze frame data can be read and erased quickly. ^*1
Data Monitor	Displays real-time input/output data of chassis control module.
ECU Identification	Displays chassis control module part number.
Active Test	Enables an operational check of a load by transmitting a driving signal from the chassis control module.
Re/programming, Configuration	Read and save the vehicle specification (TYPE ID). Write the vehicle specification (TYPE ID) when replacing chassis control module.

^* 1: The following diagnosis information is erased by erasing:

DTC
Freeze Frame Data (FFD)