Input Signal And Output Signal

Major signal transmission between each unit via communication lines is shown in the following table:

Component	Signal description
Chassis control module (with built in steering angle sensor)	Transmits the steering angle sensor signal to ABS actuator and electric unit (control unit) via CAN communication: Intelligent Trace control signal Intelligent ride control signal
ECM (Engine Control Module)	Transmits the following signals to ABS actuator and electric unit (control unit) via CAN communication: Accelerator pedal position signal Engine speed signal Target throttle position signal
TCM (Transmission Control Module)	Transmits the current gear position signal to ABS actuator and electric unit (control unit) via CAN communication.
BCM	Transmits the following signals to ABS actuator and electric unit (control unit) via CAN communication: Brake pedal position signal Stop lamp switch signal Ignition switch ON signal
Combination meter	Transmits the following signals to ABS actuator and electric unit (control unit) via CAN communication: Brake fluid level switch signal Parking brake switch signal Receives the following signals from ABS actuator and electric unit (control unit) via CAN communication: ABS warning lamp signal Brake warning lamp signal VDC OFF indicator lamp signal VDC warning lamp signal Slip indicator lamp signal