Function and System Application: Function

Mode

Function

All DTC Reading

Display all DTCs or diagnostic items that all ECUs are recording and judging.

Work Support

This mode enables a technician to adjust some devices faster and more accurately.

Self Diagnostic Results

Retrieve DTC from ECU and display diagnostic items.

CGW Information

Displays and sets the CGW status. Refer to CONSULT Function.

Data Monitor

Monitor the input/output signal of the control unit in real time.

CAN Diagnosis

This mode displays a network diagnosis result about CAN by diagram.

CAN Diagnosis Support Monitor

It monitors the status of CAN communication.

Active Test

Send the drive signal from CONSULT to the actuator. The operation check can be performed.

ECU Identification

Display the ECU identification number (part number etc.) of the selected system.

Configuration

Function to READ/WRITE vehicle configuration.

SRT&P-DTC Confirmation

The state of System Readiness Test (SRT) items, the presence or absence of permanent DTC*, and driving conditions can be checked.

DTC work support

DTC reproduction procedure can be performed speedily and precisely.

Others

Other results or histories, etc. that are recorded in ECU are displayed.