Work Procedure

WRITING MODE SELECTION
CONSULT

Select "CONFIGURATION" mode of "AVM".

When writing saved data

GO TO 2.

When writing manually

GO TO 3.
PERFORM "WRITE CONFIGURATION - Config file"
CONSULT

Perform "WRITE CONFIGURATION - Config file".

Work End.
PERFORM "MANUAL CONFIGURATION"
CONSULT

Select "MANUAL CONFIGURATION" to write vehicle specifications into the around view monitor control unit.
CAUTION:
- Thoroughly read and understand the vehicle specification. Incorrect settings may result in abnormal control of ECU.
- Make sure to select "NEXT" even if the default settings displayed on the CONSULT are the desired settings. If "NEXT" is not selected, the configuration process will be incomplete.
NOTE: If manual configuration items are not displayed, touch "NEXT".

GO TO 4.
OPERATION CHECK
Confirm that each function controlled by around view monitor control unit operates normally.

Work End.