Application Items

CONSULT can display each diagnostic item using the diagnostic test modes as follows:

Diagnosis mode	CGW Status			Description
Diagnosis mode	Restricted Mode	Diag Test Mode	Open Mode	Description
Self Diagnostic Result	Display	Display	Display	Display non-network DTC which ABS actuator and electric unit (control unit) memorizes
CGW Information	Display	Display	Display	Display the current CGW mode Enables CGW to switch mode
Data Monitor	Display	Display	Display	Displays ABS actuator and electric unit (control unit) input/output data in real time
Active Test ^*1	Non-display	Display	Display	Enables an operational check of a load by transmitting a driving signal from the ABS actuator and electric unit (control unit) to the load
Work Support ^*1	Non-display	Non-display	Display	Displays causes of automatic system cancellation occurred during system control
ECU Identification	Display	Display	Display	Displays ABS actuator and electric unit (control unit) part number
Configuration ^*1	Display	Display	Display	The vehicle specification that is written in ABS actuator and electric unit (control unit) can be displayed or stored The vehicle specification can be written when ABS actuator and electric unit (control unit) is replaced
Network-DTC	Display	Display	Display	Display network DTC which ABS actuator and electric unit (control unit) memorizes when performing "Diagnosis (All System)".
CAN Diag Support Monitor ^*2	Display	Display	Display	NOTE: The mode is indicated, but not monitored

^* : The following diagnosis information is erased by erasing: