Sleep Mode Activation
- The BCM receives the sleep-ready signal (ready) from the IPDM E/R and combination meter via CAN communication.
- The BCM transmits the sleep wake up signal (sleep) to each unit when all of the CAN sleep conditions are fulfilled.
- Each unit stops the transmission of CAN communication with the sleep wake-up signal. The BCM is in CAN communication sleep mode.
- The BCM is in the low power consumption mode and performs the low power consumption control when all of the BCM sleep conditions are fulfilled with CAN sleep condition.
Sleep condition
|
CAN sleep condition |
BCM sleep condition |
|
|