LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Plymouth >> 1994 >> Laser Base, Standard >> Repair and Diagnosis (Single Page) >> Electrical >> Starter >> Bench Testing >> Solenoid Tests >> Pull-In Coil Test
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Pull-In Coil Test

  1. Disconnect field coil wire from terminal "M" at starter solenoid. See Fig 1. Connect jumper wire between positive battery terminal and terminal "S" of solenoid.
  2. Connect a second jumper wire from negative battery terminal and touch terminal "M" of starter solenoid. See Fig 1. If solenoid plunger moves inward, solenoid is good. If solenoid plunger does not move inward, replace solenoid.
Fig 1: Identifying Starter Solenoid Terminals
G90A08770Courtesy of CHRYSLER CORP.
scientia non olet · About LEMON Manuals