Fuel Pressure Release
CAUTION:
ALWAYS relieve pressure before disconnecting any fuel injection-related components. DO NOT allow fuel to contact engine or electrical components.
- Slowly open fuel tank cap to release pressure in tank. Disconnect 2-pin injector connector at edge of throttle body. Connect a jumper wire between injector connector (injector side) Dark Green/Orange wire and battery positive terminal.
- Connect another jumper wire to injector connector (injector side) Light Blue wire. Momentarily ground jumper wire connected to Light Blue wire for no more than 5 seconds. Injector will energize open, relieving fuel pressure. Remove jumper wires. Fuel pressure is now released.