LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Body Control Modules >> Removal & Installation >> Body Control Module >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Body Control Module: Installation

  1. Install BCM (1) onto center console fuse block. See Fig 1.
  2. Rotate BCM retaining lever (2) to secure BCM to center console fuse block.
  3. Install center console fuse block. Reversing removal procedure.
  4. Connect negative battery cable.
  5. Perform new BCM setup. See BODY CONTROL MODULE PROGRAMMING - REGULAR PRODUCTION OPTION CONFIGURATION  under PROGRAMMING.
Fig 1: Removing & Installing Body Control Module
G00066089Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals