LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> Body & Frame >> Seats >> Power Seat System >> Removal & Installation >> Power Seat >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Power Seat: Installation

  1. Install front seat to studs on floor pan.
  2. Connect seat harness connectors.
  3. Install nuts to seat floor pan studs. See Fig 1 . Tighten front seat adjuster-to-floor pan nuts to 37 ft lbs. (50 N.m).
  4. Inspect front seat for proper operation and adjustment.
  5. Enable air bag system. See appropriate AIR BAG RESTRAINT SYSTEMS article.
Fig 1: Locating Power Seat Fasteners & Studs
G00063684Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals