LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1008 (Front Suspension System) >> Repair Instructions >> Spring Bumper Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
    2. Fig 1: Unsnapping The Spring Bumper From The Mounting Cup (4WD 15-Series and 2WD 25/35-Series)
    GM348563Courtesy of GENERAL MOTORS CORP.
  2. Unsnap the spring bumper from the mounting cup. For 4WD 15-Series and 2WD 25/35-Series.
    3. Fig 2: Removing The Nut From The Spring Bumper Stud (4WD 15-Series and 2WD 25/35-Series)
    GM348561Courtesy of GENERAL MOTORS CORP.
  3. Remove the nut from the spring bumper stud. For 4WD 15-Series and 2WD 25/35-Series.
  4. Remove the spring bumper.
scientia non olet · About LEMON Manuals