LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1016 (Rear Suspension System) >> Repair Instructions >> Leaf Spring Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Support the rear axle independently in order to relieve the tension on the leaf springs.
  3. Remove the trailer hitch if equipped. Refer to Trailer Hitch Replacement in Frame and Underbody.
  4. Remove the fuel tank for left side applications. Refer toFuel Tank Replacement (Pickup) or Fuel Tank Replacement (Pickup - 5.3L (L59) Engine) or Fuel Tank Replacement (1500 Crew Cab) or Fuel Tank Replacement (Cab/Chassis - Front) or Fuel Tank Replacement (Cab/Chassis - Rear) in Engine Controls - 4.8L, 5.3L, 6.0L; or Fuel Tank Replacement in Engine Controls - 4.3L or Fuel Tank Replacement (Pickup) or Fuel Tank Replacement (Cab/Chassis - Front) or Fuel Tank Replacement (Cab/Chassis - Rear) in Engine Controls - 6.6L; or Fuel Tank Replacement (Pickup) or Fuel Tank Replacement (Cab/Chassis - Front) or Fuel Tank Replacement (Cab/Chassis - Rear) in Engine Controls - 8.1L.
  5. Fig 1: Removing The U-Bolts
    GM348393Courtesy of GENERAL MOTORS CORP.
  6. Remove the U-bolt nuts.
  7. Remove the U-bolts.
  8. Remove the spring spacer.
  9. Remove the anchor plate.
  10. Fig 2: Removing The Rear Spring Hanger Bracket Nut And Bolt
    GM361791Courtesy of GENERAL MOTORS CORP.
  11. Remove the rear spring hanger bracket nut and bolt.
  12. Fig 3: Removing The Front Spring Bracket Bolt
    GM361767Courtesy of GENERAL MOTORS CORP.
  13. Remove the front spring bracket bolt.
  14. Remove the leaf spring assembly from the vehicle.