Removal Procedure
WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
- Disable the SIR system. Refer to SIR Disabling and Enabling Zone 5 .
- Remove the trim pad from the instrument panel (I/P). Refer to Instrument Panel (I/P) Assembly Replacement .
- Disconnect the inflator module connector.
- Remove the 4 bolts from the inflator restraint module bracket.
- Remove the inflatable restraint module from the I/P.
- Fully deploy the module before disposal. If the module was replaced under warranty, fully deploy and dispose of the module after the required retention period. Refer to Inflator Module Handling and Scrapping .