LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1070 (Body Rear End) >> Repair Instructions >> Strut Replacement - Liftgate >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the assist rods to the liftgate.
  2. Install the upper end of the assist rods to the ball joint. Press in to place until fully seated.
    Fig 1: View Of Lower End Of Assist Rods
    GM621881Courtesy of GENERAL MOTORS CORP.
  3. Install the lower end of the assist rods to the ball joint. Press in to place until fully seated.
    Fig 2: View Of Liftgate Struts
    GM621880Courtesy of GENERAL MOTORS CORP.
  4. Remove the support from the liftgate.
  5. Close the liftgate.