Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.

Install the hood to the vehicle, with an assistant.

Fig 1: View Of Hood
Courtesy of GENERAL MOTORS CORP.
Align the hood hinges to the alignment marks on the hood.

Fig 2: Aligning Hood To Hinges
Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.
Install the bolts to the upper hood hinge, with an assistant.
Tighten: Tighten the upper hood hinge bolts to 25 N.m (18 lb ft).

Fig 3: Identifying Upper Hood Hinge Bolts
Courtesy of GENERAL MOTORS CORP.
Install the hood assist rods. Refer to Assist Rod Replacement - Hood .
Adjust the hood as required. Refer to Hood Adjustment .