LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1136 (Engine Controls - 6.0L - Alternative Fuels (Introduction)) >> Repair Instructions >> Fuel Injector Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra and 2004 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Fuel Injector Connectors
    GM757006Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Compressed Natural Gas (CNG) O-Ring Caution in Cautions and Notices.
  1. Install the fuel injector (5) into the fuel rail (3, 4) using a new O-ring. Lubricate the new O-ring with petroleum jelly.
  2. Install the fuel injector retainer clip.
  3. Lubricate the new injector tip O-ring with clean engine oil.
  4. Repeat steps 1, 2 and 3 for the remaining fuel injectors.
  5. Install the fuel rail assembly. Refer to Fuel Rail Assembly Replacement (KL6)  or Fuel Rail Assembly Replacement (KL8) .
scientia non olet · About LEMON Manuals