LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1165 (Lighting Systems) >> Repair Instructions >> Marker Lamp Replacement - Side >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the sidemarker lamp to the fender.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the sidemarker lamp retaining nuts.

    Tighten 

    Tighten the rear sidemarker lamp retaining nuts to 2 N.m (18 lb in).

  3. Install the socket to the sidemarker lamp assembly.
  4. Install the nuts attaching the radio antenna, if removed.

    Tighten 

    Tighten the antenna bracket retaining nuts to 12 N.m (106 lb in).

  5. Install the tail lamp. Refer to TAIL LAMP REPLACEMENT .
    Fig 1: Sidemarker Lamp Retaining Nuts
    G01453373Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals