LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1166 (Wiper System And Washer System) >> Repair Instructions >> Washer Pump Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the washer pump seal to the washer solvent container, pressing in until fully seated.
  2. Position the washer pump to the washer solvent container, pressing in until fully seated.
    Fig 1: Installing Washer Pump To Washer Solvent Container
    G01453444Courtesy of GENERAL MOTORS CORP.
  3. Connect the washer pump hose.
  4. Connect the washer pump electrical connector.
  5. Install the washer solvent container. Refer to WASHER SOLVENT CONTAINER REPLACEMENT  . 
    Fig 2: Washer Pump Hose
    G01453445Courtesy of GENERAL MOTORS CORP.