LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1166 (Wiper System And Washer System) >> Repair Instructions >> Wiper Arm Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the hood.
  2. Turn the ignition switch to the ACCY position.
  3. Turn the wiper switch to the DELAY position.
  4. Turn the ignition switch OFF when the wiper arms are in the inner wipe position and not moving.
  5. Place a piece of masking tape (5) onto the windshield at the tip of each wiper blade (6) to aid in the wiper arm reinstallation.
  6. Disconnect the washer hose (3) from the air inlet grille panel.
  7. Remove the wiper arm nut cover (1).
  8. Remove the wiper arm nut (2).
  9. Using the J 39822, remove the wiper arm from the wiper transmission.
  10. Remove the wiper blade from the wiper arm. Refer to WIPER ARM BLADE REPLACEMENT .
scientia non olet · About LEMON Manuals