Accelerator Controls Cable Bracket: Removal
WARNING: This page is about a different car, the 2002 Pontiac Aztek and 2002 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the accelerator cable from the throttle body lever. Disconnect the accelerator cable from the accelerator cable bracket. Disconnect the cruise control cable from the throttle lever and accelerator bracket, if applicable.
- Disconnect the air intake duct from the throttle body. Disconnect the wire harness from the retainer. Remove the nut and bolts holding the accelerator cable bracket to the throttle body. Remove the accelerator cable bracket.