Fuel Pump: Installation

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Fuel pump strainer must be in a horizontal position when installing fuel tank sending unit into fuel tank. Ensure fuel pump strainer does not block the travel of the fuel sensing unit float arm.

Clean fuel sending unit sealing area. Install NEW fuel sending unit "O" ring onto the fuel tank opening. Lower fuel tank sending unit into fuel tank. Install fuel sending unit assembly retaining ring using Retaining Ring Remover/Installer (J-44402). Reinstall fuel tank. See FUEL TANK . Check for fuel leaks.