LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1428 (Anti-Lock Brake System) >> Repair Instructions >> ABS Automated Bleed Procedure >> Preliminary Setup
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Preliminary Setup

WARNING: This page is about a different car, the 2002 Pontiac Aztek and 2002 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and vehicle on a suitable support. Refer to LIFTING AND JACKING THE VEHICLE .
  2. Turn the ignition switch to OFF position.
  3. Remove all four tires, if necessary refer to TIRE AND WHEEL REMOVAL AND INSTALLATION .
  4. Connect the pressure bleeding tool according to the manufacturer's instructions.
  5. Turn the ignition switch to RUN position, engine off.
  6. Connect a scan tool and establish communications with the ABS system.
  7. Pressurize the bleeding tool to 206 to 241 kPa (30 to 35 psi).
scientia non olet · About LEMON Manuals