Installation Procedure

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: License Lamp Bezel

Courtesy of GENERAL MOTORS CORP.

Position the license lamp bezel on the lift gate.

NOTE: Refer to FASTENER NOTICE in Cautions and Notices.

Install the license lamp bezel to lift gate nuts.
Tighten: Tighten the nuts to 4 N.m (35 lb in).
Connect the license lamp electrical connector.
Install the rear wiper assembly. Refer to Wiper Motor Replacement - Liftgate in Wiper/Washer Systems.
Install the lift gate interior trim panel. Refer to Trim Panel Replacement - Liftgate in Body Rear End.