Installation Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Positioning Wiper Blade Assembly

Courtesy of GENERAL MOTORS CORP.

Position wiper blade assembly at tick mark in lower portion of windshield blackout strip on driver side of vehicle.
Position wiper blade assembly at tick mark in windshield pillar portion of windshield blackout strip on passenger side of vehicle.

Fig 2: Removing/Installing Wiper Arm

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to FASTENER NOTICE .

Install the wiper arm nut.
Tighten: Tighten the nut to 27 N.m (20 lb ft).
Operate the windshield wipers and inspect for proper operation.