Installation Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing/Installing Wiper Motor

Courtesy of GENERAL MOTORS CORP.

Position the wiper motor to the wiper module.

NOTE: Refer to Fastener Notice .

Install the two wiper motor to wiper module frame bolts.
Tighten: Tighten the bolts to 8 N.m (71 lb in).
Install the wiper motor crank arm and crank arm nut.
Tighten: Tighten the screws to 14 N.m (10 lb ft).
Install the wiper motor module. Refer to Wiper Motor Module Replacement .