LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1629 (Lighting System) >> Repair Instructions >> High Mount Stop Lamp Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear spoiler. Refer to Rear Spoiler Replacement .
  2. Invert the spoiler and place on a clean dry, protected surface.
    3. Fig 1: High Mounted Stop Lamp Screws
    GM1872832Courtesy of GENERAL MOTORS CORP.
  3. Remove the spoiler to high mounted stop lamp screws (1).
  4. Disengage the washer hose from the spoiler.
  5. Disengage the electrical connector (2) from the spoiler bracket.
  6. Lift the high mounted stop lamp (3) from the spoiler.
    7. Fig 2: Washer Nozzle Screws
    GM1872833Courtesy of GENERAL MOTORS CORP.
  7. Remove the washer nozzle screws (1).
  8. Remove the rear washer nozzles (3) from the high mounted stop lamp (4) assembly.
  9. Remove the high mounted stop lamp assembly (4).
scientia non olet · About LEMON Manuals