LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 596 (Anti-Lock Brake System) >> Repair Instructions >> Air Cleaner Intake Duct Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
  1. Combine the air cleaner intake duct and the mass air flow/intake air temperature (MAF/IAT) sensor.
  2. Install the air cleaner intake and the MAF/IAT assembly on the throttle body and on the air cleaner cover.
    CAUTION: Refer to FASTENER NOTICE in Cautions and Notices.
  3. Inspect for proper alignment of the air cleaner intake and MAF/IAT assembly and tighten the hose clamps.

    Tighten 

    Tighten the air cleaner intake and MAF/IAT assembly clamps to 3 N.m (27 in lbs).

  4. Connect the mass air flow/intake air temperature (MAF/IAT) sensor electrical connector.