LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 643 (Body Rear End) >> Repair Instructions >> Strut Replacement - Liftgate >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Installing Liftgate Strut
    GM522123Courtesy of GENERAL MOTORS CORP.
  1. Position the assist rods to the lift gate.
  2. Install the upper end of the assist rods to the ball joint. Press into place until fully seated.
  3. Install the lower end of the assist rods to the ball joint. Press into place until fully seated.
  4. Remove the support from the lift gate.
  5. Close the lift gate.