LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 705 (Seat Belt System) >> Repair Instructions >> Child Restraint Tether Anchor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2002 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the tether anchor bracket to the rear self.
    CAUTION: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the tether anchor bolt.

    Tighten 

    Tighten the tether anchor bolt to 20 N.m (15 lb ft).

  3. Install the tether bezel to the rear self.
    Fig 1: Installing Child Restraint Tether Anchor
    G01780888Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals