LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 714 (Wiper System And Washer System) >> Repair Instructions >> Washer Solvent Container Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2002 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the washer solvent container to the frame rail.
    CAUTION: Refer to FASTENER NOTICE .
  2. Install the washer solvent container screws.

    Tighten 

    Tighten the screws to 6 N.m (53 lb in).

  3. Connect the washer solvent level sensor electrical connector.
  4. Connect the washer hose to the washer pump.
  5. Connect the washer pump electrical connector.
  6. Install the air cleaner intake duct.
  7. Fill the washer solvent container with washer solvent.
    Fig 1: Installing Washer Solvent Container
    G01779714Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals