Ignition Coil Removal/Installation

WARNING: This page is about a different car, the 2004 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.

Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION .)
Disconnect the negative battery cable.
Remove the plug hole plate. (See PLUG HOLE PLATE REMOVAL/INSTALLATION .)
Remove in the order indicated in the table.
Install in the reverse order of removal.

Fig 1: Ignition Coils With Torque Specifications
Courtesy of MAZDA MOTORS CORP.

Fig 2: Ignition Coil Removal Order Table
Courtesy of MAZDA MOTORS CORP.