LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 751 (Glass/Windows/Mirrors) >> Rear Manual Window Regulator Removal/Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Rear Manual Window Regulator Removal/Installation

WARNING: This page is about a different car, the 2004 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the following parts:
    1. Rear beltline molding (See REAR BELTLINE MOLDING REMOVAL/INSTALLATION .)
    2. Sail garnish (5 door) (See SAIL GARNISH REMOVAL/INSTALLATION .)
    3. Rear door garnish (5 door) (See REAR DOOR GARNISH REMOVAL/INSTALLATION .)
    4. Regulator handle (See REGULATOR HANDLE REMOVAL .)
    5. Rear door trim (See REAR DOOR TRIM REMOVAL/INSTALLATION .)
    6. Rear door glass (See REAR DOOR GLASS REMOVAL/INSTALLATION .)
  2. Remove the nuts and the bolts.
    Fig 1: Rear Manual Window Regulator Nuts & Bolts With Torque Specifications
    G02566711Courtesy of MAZDA MOTORS CORP.
  3. Remove the rear manual window regulator through the rear door unit hole.
    Fig 2: Removing Rear Manual Window Regulator Through Speaker Installation Hole
    G02566712Courtesy of MAZDA MOTORS CORP.
  4. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals