LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 871 (Front Drive Axle - 4WD) >> Repair Instructions >> Shield Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the front differential carrier shield.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the front differential carrier shield bolts and the washers.

    Tighten 

    Tighten the front differential carrier shield bolts to 25 N.m (18 lb ft).

  3. Lower the vehicle.
Fig 1: Installing Front Differential Carrier Shield Bolts And Washers
G01467960Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals