Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Install the tool storage compartment to the vehicle.
Install the nuts that retain the tool storage compartment to the vehicle.

Fig 1: Installing Tool Storage Compartment (PRO)

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the nuts that retain the tool storage compartment to the mounting brackets.
Tighten: Tighten the nuts to 10 N.m (88 lb in).
Lower the rear seat.