Removal Procedure
WARNING: This page is about a different car, the 2004 GMC Sierra and 2004 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the spark plug wire from the spark plug.
- Twist the boot 1/2 turn before removing the boot.
- Pull only on the boot or use a tool designed for this purpose in order to remove the wire from the spark plug.
- Loosen the spark plug 1 or 2 turns.
- Brush or air blast away any dirt from around the spark plug.
- Remove the spark plug. If removing more than 1 plug, place each plug in a tray marked with the corresponding cylinder number.