LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 945 (Engine Controls - 4.3L (Introduction)) >> Repair Instructions >> Spark Plug Wire Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra and 2004 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the spark plug wire from the spark plug.
    1. Twist the boot 1/2 turn before removing the boot.
    2. Pull only on the boot or use a tool designed for this purpose in order to remove the wire from the spark plug.
  2. Remove the spark plug wire from the distributor.
    1. Twist each spark plug boot 1/2 turn.
    2. Pull only on the boot or use a tool designed for this purpose in order to remove the wire from the distributor.
  3. Remove the spark plug wire from the wire separators.
    4. Fig 1: View Of Spark Plug Wire Retaining Bracket
    GM317450Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals