Scan Tool Output Controls
WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Rear Wheel Steering Scan Tool Output Controls
| Scan Tool Output Control | Additional Menu Selections | Description |
|---|---|---|
| 2-Wheel Steer Mode Lamp | - | The scan tool commands the 2-Wheel Steer Mode Lamp ON when selected. The 2-Wheel Steer LED on the Rear Wheel Steering Mode Select switch should illuminate until commanded OFF. |
| 4-Wheel Steer Mode Lamp | - | The scan tool commands the 4-Wheel Steer Mode Lamp ON when selected. The 4-Wheel Steer LED on the Rear Wheel Steering Mode Select switch should illuminate until commanded OFF. |
| 4-Wheel Steer-Tow Mode Lamp | - | The scan tool commands the 4-Wheel Steer Tow Mode Lamp ON when selected. The TOW LED on the Rear Wheel Steering Mode Select switch should illuminate until commanded OFF. |
| Command 2-Wheel Steer | - | The scan tool commands the 2-Wheel Steering mode when ON is selected. |
| Command 4-Wheel Steer | - | The scan tool commands the 4-Wheel Steering mode when ON is selected. |
| Command 4 Wheel Steer-Tow | - | The scan tool commands the 4-Wheel Steering Trailering mode when ON is selected. |
| Command Rear Steer Left | - | The scan tool commands the Rear Steering Motor and turns the rear wheels left when commanded ON. The system returns to normal operation when the parameter is commanded OFF. |
| Command Rear Steer Right | - | The scan tool commands the Rear Steering Motor and turns the rear wheels right when commanded ON. The system returns to normal operation when the parameter is commanded OFF. |
| Learn Alignment | - | The scan tool performs the Learn Alignment Procedure. |
| Steer Mode Lamps (All) | - | The scan tool commands all of the Rear Wheel Steering Mode Lamps ON when selected. |