LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Shift Interlock Systems >> Removal & Installation >> Floor Shift Control >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Floor Shift Control: Installation

  1. Install the shift control. Install the shift control nuts. See Fig 2. Tighten the nuts to 89 INCH lbs. (10 N.m). Install the shift cable to the shift control. See Fig 1.
  2. Install the shift control wire harness to the shift control. Adjust the shift control cable as necessary. See SHIFT CABLE  under ADJUSTMENTS.
  3. Install the console trim plate. See FLOOR CONSOLE TRIM PLATE .
Fig 1: Removing & Installing Shift Cable At Control
G00079822Courtesy of GENERAL MOTORS CORP.
Fig 2: Removing & Installing Shift Control Assembly
G00079821Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals