Code Enable Criteria

For DTC to run, the following conditions must be met for 2 seconds:

• DTCs P0101-P0103, P0106-P0108, P0112, P0113, P0117, P0118, P0121-P0123, P0125, P0128, P0171, P0172, P0174, P0175, P0200, P0300, P0440, P0442, P0443, P0446, P0449, P1111, P1112, P1114, P1115, P1121, P1122, P1380, P1381, and P1441 are not set.
• Engine run time is more than 60 seconds.
• ECT is more than 140°F (60°C).
• IAT is more than 14°F (-10°C).
• Throttle Position (TP) sensor is less than 0.7 percent.
• Barometric Pressure (BARO) is more than 65 kPa.
• Vehicle speed is less than one MPH.
• Ignition voltage is 9-18 volts.

DTC will set when actual engine speed is 100 RPM more than desired engine speed.