LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2002 >> Aztek AWD >> Repair and Diagnosis >> Accessories & Equipment >> Entertainment Systems >> Entertainment System >> Repair Instructions >> Radio Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. Connect the coaxial cable connector to the radio.
  2. Connect the electrical/audio connectors to the radio.
  3. Install the radio to the IP.

    Important:  If the radio locator tab is difficult to align to the IP locator opening, pull the radio toward you and reposition the antenna cable.

  4. Align the radio control locator tab to the IP locator hole while carefully pressing the radio into the IP until fully seated.
    Fig 1: Connecting Electrical & Cable Connectors
    G01721495Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to FASTENER NOTICE .
  5. Install the radio screws.

    Tighten 

    Tighten the radio screws to 2.5 N.m (22 lb in).

  6. Install the IP accessory trim plate. Refer to TRIM PLATE REPLACEMENT - INSTRUMENT PANEL (I/P) ACCESSORY (AZTEK) .
  7. Perform the radio set-up procedure. Refer to Radio Setup .
    Fig 2: Installing Radio Screws
    G01721496Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals