LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2002 >> Aztek AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1130 (Battery) >> Repair Instructions >> Ground Strap Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the ground strap terminal (1) and engine harness ground to the block.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the ground strap bolt.

    Tighten 

    Tighten the ground strap bolt to 32 N.m (24 lb ft).

    Fig 1: Ground Strap
    G01971921Courtesy of GENERAL MOTORS CORP.
  3. Lower the vehicle.
  4. Install the ground strap terminal and nut to the stud.

    Tighten 

    Tighten the ground strap nut to 8 N.m (71 lb in).

    Fig 2: Installing Ground Strap Terminal & Nut To Stud
    G01971922Courtesy of GENERAL MOTORS CORP.