LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2002 >> Aztek AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1256 (Wiper System & Washer System) >> Repair Instructions >> Wiper Arm Replacement >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the wiper blade onto the wiper arm. Refer to Wiper Arm Blade Replacement .
    2. Fig 1: Windshield At Tip Of Wiper Blade To Wiper Arm
    GM70095Courtesy of GENERAL MOTORS CORP.
  2. Position the tip of the wiper blade (6) to the marks made on the windshield with masking tape (5).
  3. Install the wiper arm onto the wiper transmission (4).
    4. NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Install the wiper arm nut (2).

    Tighten:  Tighten the nut (2) to 25 N.m (18 lb ft).

  5. Install the wiper arm nut cover (1).
  6. Connect the washer hose (3) to the air inlet grille panel.
  7. Remove the masking tape (5) from the windshield.
  8. Inspect the wipers for proper operation.
scientia non olet · About LEMON Manuals